Pepys

Free tool

Speech Time Calculator

Paste your script or enter a word count, choose how fast you speak, and see how long it takes to say. Or start from a time and find how many words you need.

What do you want to work out?
Start from

Your text is calculated in your browser and isn't uploaded.

Speaking speed

A typical talk or presentation.

Estimated speaking time

Paste a script above to see how long it takes to say.

How many words for each speech length

Words for a given speaking time at the three speeds above. Each figure is the minutes multiplied by the words per minute, rounded to a whole word.

Approximate words for each speech length at slow, conversational and fast speeds
Speech lengthSlow100 words per minuteConversational130 words per minuteFast160 words per minute
1 minute100 words130 words160 words
3 minutes300 words390 words480 words
5 minutes500 words650 words800 words
10 minutes1,000 words1,300 words1,600 words
15 minutes1,500 words1,950 words2,400 words
20 minutes2,000 words2,600 words3,200 words
30 minutes3,000 words3,900 words4,800 words
60 minutes6,000 words7,800 words9,600 words

How the speech time calculator works

It divides your word count by your speaking speed: words ÷ words per minute = minutes. For 1,300 words at 130 words per minute that is 10 minutes. The result line under the calculator shows the sum it did, so you can check it by hand.

The other mode runs the same sum backwards: minutes × words per minute = words.

Words are counted the way most word counters do it: anything separated by spaces, so “well-known” is one word and a lone dash is none. That suits languages written with spaces. For Chinese, Japanese or Thai, count the words another way and enter the number.

What speaking speed should I use?

Speakers differ a lot, so there is no one correct number. The three speeds are planning conventions, not measured averages:

  • Slow, 100 words per minute. Deliberate delivery: a toast, a eulogy, dense material.
  • Conversational, 130 words per minute. A typical talk or presentation.
  • Fast, 160 words per minute. Familiar material, said briskly.

Slower pacing gives you room for emphasis and gives listeners time to take in a point. A faster pace covers more ground, but leaves less room for pauses, and the words are harder to follow if the material is new to the audience.

Measured rates are higher than these planning speeds:

Those figures come from people reading passages aloud and chatting on the phone, not from delivering a speech with emphasis, slides and an audience. The presets here sit lower, which keeps the estimate on the cautious side. If you know you speak faster or slower, pick Custom and enter a speed between 50 and 300 words per minute.

Why your real speech may take longer

The calculator assumes a steady pace from the first word to the last. A live talk is rarely steady:

  • Pauses for effect, and to breathe.
  • Laughter, applause or other reactions from the audience.
  • Slide changes, demonstrations and anything you show instead of say.
  • Emphasis, and repeating a point that matters.
  • Questions during or after the talk.
  • Hesitations, restarts and the odd lost thread.

If the slot is strict, treat the estimate as the time for the words alone, leave a margin, and time a full run-through out loud.

How to estimate your actual speed

  1. Pick a passage of known length. Paste it above to count the words, or use a page you have already counted.
  2. Read it aloud at the pace you plan to use, and time yourself.
  3. Divide the words by the minutes. For example, 220 words in 1 minute 40 seconds is 220 ÷ 1.67, or about 132 words per minute.
  4. Choose Custom in the calculator and enter that number.

Our speaking speed test does the timing and the sum for you. Reading a script aloud and speaking off the cuff are not the same pace, so rehearse the way you will deliver.

Common questions

How many words are in a 5-minute speech?

At 130 words per minute, a five-minute speech is about 650 words. At a slow 100 words per minute it is about 500, and at a fast 160 about 800.

How many words are in a 10-minute speech?

At 130 words per minute, a ten-minute speech is about 1,300 words. At 100 words per minute it is about 1,000, and at 160 about 1,600.

How long does it take to say 1,000 words?

At 130 words per minute, 1,000 words take about 7 min 42 sec. At 100 words per minute it is 10 min, and at 160 it is 6 min 15 sec.

What is a normal speaking rate?

There is no single normal rate. Measured averages are about 183 words per minute for reading aloud and 196 for casual telephone conversation, and people vary widely around both. A prepared speech is usually planned at a slower pace, with room for pauses. This page plans with 100, 130 and 160 words per minute, and lets you enter your own.

How do I calculate speaking time?

Divide the number of words by your speaking speed in words per minute. For example, 1,300 words at 130 words per minute is 10 minutes. To go the other way, multiply minutes by words per minute.

Speaking is often faster than typing

How fast people speak and how fast they type both vary a lot, so the gap is different for everyone. The typing comparison in the calculator uses your own two speeds.

Pepys Dictate is a Mac app that types what you say into whatever app you are in, so you speak where you normally type. Speech recognition and formatting run on your Mac. It needs Apple silicon and macOS 13 or later.